website/content/en/docs/tasks/run-application/update-api-object-kubectl-patch.md

title, description, content_template, weight

title	description	content_template	weight
Update API Objects in Place Using kubectl patch	Use kubectl patch to update Kubernetes API objects in place. Do a strategic merge patch or a JSON merge patch.	templates/task	40

{{% capture overview %}}

This task shows how to use kubectl patch to update an API object in place. The exercises in this task demonstrate a strategic merge patch and a JSON merge patch.

{{% /capture %}}

{{% capture prerequisites %}}

{{< include "task-tutorial-prereqs.md" >}} {{< version-check >}}

{{% /capture %}}

{{% capture steps %}}

Use a strategic merge patch to update a Deployment

Here's the configuration file for a Deployment that has two replicas. Each replica is a Pod that has one container:

{{< codenew file="application/deployment-patch.yaml" >}}

Create the Deployment:

kubectl apply -f https://k8s.io/examples/application/deployment-patch.yaml

View the Pods associated with your Deployment:

kubectl get pods

The output shows that the Deployment has two Pods. The 1/1 indicates that each Pod has one container:

NAME                        READY     STATUS    RESTARTS   AGE
patch-demo-28633765-670qr   1/1       Running   0          23s
patch-demo-28633765-j5qs3   1/1       Running   0          23s

Make a note of the names of the running Pods. Later, you will see that these Pods get terminated and replaced by new ones.

At this point, each Pod has one Container that runs the nginx image. Now suppose you want each Pod to have two containers: one that runs nginx and one that runs redis.

Create a file named patch-file-containers.yaml that has this content:

spec:
  template:
    spec:
      containers:
      - name: patch-demo-ctr-2
        image: redis

Patch your Deployment:

kubectl patch deployment patch-demo --patch "$(cat patch-file-containers.yaml)"

View the patched Deployment:

kubectl get deployment patch-demo --output yaml

The output shows that the PodSpec in the Deployment has two Containers:

containers:
- image: redis
  imagePullPolicy: Always
  name: patch-demo-ctr-2
  ...
- image: nginx
  imagePullPolicy: Always
  name: patch-demo-ctr
  ...

View the Pods associated with your patched Deployment:

kubectl get pods

The output shows that the running Pods have different names from the Pods that were running previously. The Deployment terminated the old Pods and created two new Pods that comply with the updated Deployment spec. The 2/2 indicates that each Pod has two Containers:

NAME                          READY     STATUS    RESTARTS   AGE
patch-demo-1081991389-2wrn5   2/2       Running   0          1m
patch-demo-1081991389-jmg7b   2/2       Running   0          1m

Take a closer look at one of the patch-demo Pods:

kubectl get pod <your-pod-name> --output yaml

The output shows that the Pod has two Containers: one running nginx and one running redis:

containers:
- image: redis
  ...
- image: nginx
  ...

Notes on the strategic merge patch

The patch you did in the preceding exercise is called a strategic merge patch. Notice that the patch did not replace the containers list. Instead it added a new Container to the list. In other words, the list in the patch was merged with the existing list. This is not always what happens when you use a strategic merge patch on a list. In some cases, the list is replaced, not merged.

With a strategic merge patch, a list is either replaced or merged depending on its patch strategy. The patch strategy is specified by the value of the patchStrategy key in a field tag in the Kubernetes source code. For example, the Containers field of PodSpec struct has a patchStrategy of merge:

type PodSpec struct {
  ...
  Containers []Container `json:"containers" patchStrategy:"merge" patchMergeKey:"name" ...`

You can also see the patch strategy in the OpenApi spec:

"io.k8s.api.core.v1.PodSpec": {
    ...
     "containers": {
      "description": "List of containers belonging to the pod. ...
      },
      "x-kubernetes-patch-merge-key": "name",
      "x-kubernetes-patch-strategy": "merge"
     },

And you can see the patch strategy in the [Kubernetes API documentation](/docs/reference/generated/kubernetes-api/{{< param "version" >}}/#podspec-v1-core).

Create a file named patch-file-tolerations.yaml that has this content:

spec:
  template:
    spec:
      tolerations:
      - effect: NoSchedule
        key: disktype
        value: ssd

Patch your Deployment:

kubectl patch deployment patch-demo --patch "$(cat patch-file-tolerations.yaml)"

View the patched Deployment:

kubectl get deployment patch-demo --output yaml

The output shows that the PodSpec in the Deployment has only one Toleration:

tolerations:
      - effect: NoSchedule
        key: disktype
        value: ssd

Notice that the tolerations list in the PodSpec was replaced, not merged. This is because the Tolerations field of PodSpec does not have a patchStrategy key in its field tag. So the strategic merge patch uses the default patch strategy, which is replace.

type PodSpec struct {
  ...
  Tolerations []Toleration `json:"tolerations,omitempty" protobuf:"bytes,22,opt,name=tolerations"`

Use a JSON merge patch to update a Deployment

A strategic merge patch is different from a JSON merge patch. With a JSON merge patch, if you want to update a list, you have to specify the entire new list. And the new list completely replaces the existing list.

The kubectl patch command has a type parameter that you can set to one of these values:

Parameter value	Merge type
json	JSON Patch, RFC 6902
merge	JSON Merge Patch, RFC 7386
strategic	Strategic merge patch

For a comparison of JSON patch and JSON merge patch, see JSON Patch and JSON Merge Patch.

The default value for the type parameter is strategic. So in the preceding exercise, you did a strategic merge patch.

Next, do a JSON merge patch on your same Deployment. Create a file named patch-file-2.yaml that has this content:

spec:
  template:
    spec:
      containers:
      - name: patch-demo-ctr-3
        image: gcr.io/google-samples/node-hello:1.0

In your patch command, set type to merge:

kubectl patch deployment patch-demo --type merge --patch "$(cat patch-file-2.yaml)"

View the patched Deployment:

kubectl get deployment patch-demo --output yaml

The containers list that you specified in the patch has only one Container. The output shows that your list of one Container replaced the existing containers list.

spec:
  containers:
  - image: gcr.io/google-samples/node-hello:1.0
    ...
    name: patch-demo-ctr-3

List the running Pods:

kubectl get pods

In the output, you can see that the existing Pods were terminated, and new Pods were created. The 1/1 indicates that each new Pod is running only one Container.

NAME                          READY     STATUS    RESTARTS   AGE
patch-demo-1307768864-69308   1/1       Running   0          1m
patch-demo-1307768864-c86dc   1/1       Running   0          1m

Alternate forms of the kubectl patch command

The kubectl patch command takes YAML or JSON. It can take the patch as a file or directly on the command line.

Create a file named patch-file.json that has this content:

{
   "spec": {
      "template": {
         "spec": {
            "containers": [
               {
                  "name": "patch-demo-ctr-2",
                  "image": "redis"
               }
            ]
         }
      }
   }
}

The following commands are equivalent:

kubectl patch deployment patch-demo --patch "$(cat patch-file.yaml)"
kubectl patch deployment patch-demo --patch 'spec:\n template:\n  spec:\n   containers:\n   - name: patch-demo-ctr-2\n     image: redis'

kubectl patch deployment patch-demo --patch "$(cat patch-file.json)"
kubectl patch deployment patch-demo --patch '{"spec": {"template": {"spec": {"containers": [{"name": "patch-demo-ctr-2","image": "redis"}]}}}}'

Summary

In this exercise, you used kubectl patch to change the live configuration of a Deployment object. You did not change the configuration file that you originally used to create the Deployment object. Other commands for updating API objects include kubectl annotate, kubectl edit, kubectl replace, kubectl scale, and kubectl apply.

{{% /capture %}}

{{% capture whatsnext %}}

• Kubernetes Object Management
• Managing Kubernetes Objects Using Imperative Commands
• Imperative Management of Kubernetes Objects Using Configuration Files
• Declarative Management of Kubernetes Objects Using Configuration Files

{{% /capture %}}