command titles should not be translated (#18564)

content/zh/docs/reference/setup-tools/kubeadm/kubeadm-init-phase.md

@@ -26,7 +26,7 @@ and behind the scene both use the same code.
 <!--
 ## kubeadm init phase preflight {#cmd-phase-preflight}
 -->
-## kubeadm 初始化启动前检查阶段 {#cmd-phase-preflight}
+## kubeadm init phase preflight {#cmd-phase-preflight}
 
 <!--
 Using this command you can execute preflight checks on a control-plane node.
@@ -40,7 +40,7 @@ Using this command you can execute preflight checks on a control-plane node.
 <!--
 ## kubeadm init phase kubelet-start {#cmd-phase-kubelet-start}
 -->
-## kubeadm 初始化启动 kubelet 阶段 {#cmd-phase-kubelet-start}
+## kubeadm init phase kubelet-start {#cmd-phase-kubelet-start}
 
 <!--
 This phase will write the kubelet configuration file and environment file and then start the kubelet.
@@ -54,7 +54,7 @@ This phase will write the kubelet configuration file and environment file and th
 <!--
 ## kubeadm init phase certs {#cmd-phase-certs}
 -->
-## kubeadm 初始化证书阶段 {#cmd-phase-certs}
+## kubeadm init phase certs {#cmd-phase-certs}
 
 <!--
 Can be used to create all required certificates by kubeadm.
@@ -80,7 +80,7 @@ Can be used to create all required certificates by kubeadm.
 <!--
 ## kubeadm init phase kubeconfig {#cmd-phase-kubeconfig}
 -->
-## kubeadm 初始化 kubeconfig 阶段 {#cmd-phase-kubeconfig}
+## kubeadm init phase kubeconfig {#cmd-phase-kubeconfig}
 
 <!--
 You can create all required kubeconfig files by calling the `all` subcommand or call them individually.
@@ -100,7 +100,7 @@ You can create all required kubeconfig files by calling the `all` subcommand or
 <!--
 ## kubeadm init phase control-plane {#cmd-phase-control-plane}
 -->
-## kubeadm 初始化 control-plane 阶段 {#cmd-phase-control-plane}
+## kubeadm init phase control-plane {#cmd-phase-control-plane}
 
 <!--
 Using this phase you can create all required static Pod files for the control plane components.
@@ -119,7 +119,7 @@ Using this phase you can create all required static Pod files for the control pl
 <!--
 ## kubeadm init phase etcd {#cmd-phase-etcd}
 -->
-## kubeadm 初始化 etcd 阶段 {#cmd-phase-etcd}
+## kubeadm init phase etcd {#cmd-phase-etcd}
 
 <!--
 Use the following phase to create a local etcd instance based on a static Pod file.
@@ -135,7 +135,7 @@ Use the following phase to create a local etcd instance based on a static Pod fi
 <!--
 ## kubeadm init phase upload-config {#cmd-phase-upload-config}
 -->
-## kubeadm 初始化上传 config 配置阶段 {#cmd-phase-upload-config}
+## kubeadm init phase upload-config {#cmd-phase-upload-config}
 
 <!--
 You can use this command to upload the kubeadm configuration to your cluster.
@@ -154,7 +154,7 @@ Alternatively, you can use [kubeadm config](/docs/reference/setup-tools/kubeadm/
 <!--
 ## kubeadm init phase upload-certs {#cmd-phase-upload-certs}
 -->
-## kubeadm 初始化上传证书阶段 {#cmd-phase-upload-certs}
+## kubeadm init phase upload-certs {#cmd-phase-upload-certs}
 
 <!--
 Use the following phase to upload control-plane certificates to the cluster.
@@ -170,7 +170,7 @@ By default the certs and encryption key expire after two hours.
 <!--
 ## kubeadm init phase mark-control-plane {#cmd-phase-mark-control-plane}
 -->
-## kubeadm 初始化标记控制平面阶段 {#cmd-phase-mark-control-plane}
+## kubeadm init phase mark-control-plane {#cmd-phase-mark-control-plane}
 
 <!--
 Use the following phase to label and taint the node with the `node-role.kubernetes.io/master=""` key-value pair.
@@ -185,7 +185,7 @@ Use the following phase to label and taint the node with the `node-role.kubernet
 <!--
 ## kubeadm init phase bootstrap-token {#cmd-phase-bootstrap-token}
 -->
-## kubeadm 初始化引导令牌阶段 {#cmd-phase-bootstrap-token}
+## kubeadm init phase bootstrap-token {#cmd-phase-bootstrap-token}
 
 <!--
 Use the following phase to configure bootstrap tokens.
@@ -200,7 +200,7 @@ Use the following phase to configure bootstrap tokens.
 <!--
 ## kubeadm init phase addon {#cmd-phase-addon}
 -->
-## kubeadm 初始化插件阶段 {#cmd-phase-addon}
+## kubeadm init phase addon {#cmd-phase-addon}
 
 <!--
 You can install all the available addons with the `all` subcommand, or
@@ -271,4 +271,4 @@ For more details on each field in the `v1beta2` configuration you can navigate t
 * [kubeadm init](/docs/reference/setup-tools/kubeadm/kubeadm-init/) 引导 Kubernetes 控制平面节点
 * [kubeadm join](/docs/reference/setup-tools/kubeadm/kubeadm-join/) 将节点连接到集群
 * [kubeadm reset](/docs/reference/setup-tools/kubeadm/kubeadm-reset/) 恢复通过 `kubeadm init` 或 `kubeadm join` 操作对主机所做的任何更改
-* [kubeadm alpha](/docs/reference/setup-tools/kubeadm/kubeadm-alpha/) 尝试实验性功能
+* [kubeadm alpha](/docs/reference/setup-tools/kubeadm/kubeadm-alpha/) 尝试实验性功能

content/zh/docs/reference/setup-tools/kubeadm/kubeadm-join-phase.md

@@ -22,13 +22,13 @@ and behind the scene both use the same code.
 -->
 `kubeadm join phase` 与 [kubeadm join 工作流程](/docs/reference/setup-tools/kubeadm/kubeadm-join/#join-workflow) 一致，后台都使用相同的代码。
 
-## kubeadm join 阶段 {#cmd-join-phase}
+## kubeadm join phase {#cmd-join-phase}
 
 {{< tabs name="tab-phase" >}}
 {{< tab name="phase" include="generated/kubeadm_join_phase.md" />}}
 {{< /tabs >}}
 
-## kubeadm join 启动前检查阶段 {#cmd-join-phase-preflight}
+## kubeadm join phase preflight {#cmd-join-phase-preflight}
 
 <!--
 Using this phase you can execute preflight checks on a joining node.
@@ -39,7 +39,7 @@ Using this phase you can execute preflight checks on a joining node.
 {{< tab name="preflight" include="generated/kubeadm_join_phase_preflight.md" />}}
 {{< /tabs >}}
 
-## kubeadm join 控制平面节点准备工作 {#cmd-join-phase-control-plane-prepare}
+## kubeadm join phase control-plane-prepare {#cmd-join-phase-control-plane-prepare}
 
 <!--
 Using this phase you can prepare a node for serving a control-plane.
@@ -55,7 +55,7 @@ Using this phase you can prepare a node for serving a control-plane.
 {{< tab name="control-plane" include="generated/kubeadm_join_phase_control-plane-prepare_control-plane.md" />}}
 {{< /tabs >}}
 
-## kubeadm join 启动 kubelet 阶段 {#cmd-join-phase-kubelet-start}
+## kubeadm join phase kubelet-start {#cmd-join-phase-kubelet-start}
 
 <!--
 Using this phase you can write the kubelet settings, certificates and (re)start the kubelet.
@@ -66,7 +66,7 @@ Using this phase you can write the kubelet settings, certificates and (re)start
 {{< tab name="kubelet-start" include="generated/kubeadm_join_phase_kubelet-start.md" />}}
 {{< /tabs >}}
 
-## kubeadm join 控制平面节点加入过程 {#cmd-join-phase-control-plane-join}
+## kubeadm join phase control-plane-join {#cmd-join-phase-control-plane-join}
 
 <!--
 Using this phase you can join a node as a control-plane instance.

content/zh/docs/reference/setup-tools/kubeadm/kubeadm-reset-phase.md

@@ -22,13 +22,13 @@ and behind the scene both use the same code.
 -->
 `kubeadm reset phase` 与 [kubeadm reset 工作流程](/docs/reference/setup-tools/kubeadm/kubeadm-reset/#reset-workflow) 一致，后台都使用相同的代码。
 
-## kubeadm reset 阶段 {#cmd-reset-phase}
+## kubeadm reset phase {#cmd-reset-phase}
 
 {{< tabs name="tab-phase" >}}
 {{< tab name="phase" include="generated/kubeadm_reset_phase.md" />}}
 {{< /tabs >}}
 
-## kubeadm reset 启动前检查阶段 {#cmd-reset-phase-preflight}
+## kubeadm reset phase preflight {#cmd-reset-phase-preflight}
 
 <!--
 Using this phase you can execute preflight checks on a node that is being reset.
@@ -42,7 +42,7 @@ Using this phase you can execute preflight checks on a node that is being reset.
 <!--
 ## kubeadm reset phase update-cluster-status
 -->
-## kubeadm reset 更新集群节点的阶段 {#cmd-reset-phase-update-cluster-status}
+## kubeadm reset phase update-cluster-status {#cmd-reset-phase-update-cluster-status}
 
 <!--
 Using this phase you can remove this control-plane node from the ClusterStatus object.
@@ -54,7 +54,7 @@ Using this phase you can remove this control-plane node from the ClusterStatus o
 {{< /tabs >}}
 
 <!--
-## kubeadm reset 移除 etcd 成员的阶段
+## kubeadm reset phase remove-etcd-member
 -->
 ## kubeadm reset phase remove-etcd-member {#cmd-reset-phase-remove-etcd-member}
 
@@ -70,7 +70,7 @@ Using this phase you can remove this control-plane node's etcd member from the e
 <!--
 ## kubeadm reset phase cleanup-node
 -->
-## kubeadm reset 清理节点阶段工作 {#cmd-reset-phase-cleanup-node}
+## kubeadm reset phase cleanup-node {#cmd-reset-phase-cleanup-node}
 
 <!--
 Using this phase you can perform cleanup on this node.

content/zh/docs/reference/setup-tools/kubeadm/kubeadm-upgrade-phase.md

@@ -14,7 +14,7 @@ following releases.
 ## kubeadm upgrade node phase {#cmd-node-phase}
 -->
 
-## kubeadm 升级节点阶段 {#cmd-node-phase}
+## kubeadm upgrade node phase {#cmd-node-phase}
 
 <!--
 Using this phase you can choose to execute the separate steps of the upgrade of