Remove manual deploy on Ubuntu

2017-09-11 01:21:20 +08:00
parent 6dabd96cd6
commit 48714d5c9d
3 changed files with 0 additions and 310 deletions
@@ -94,7 +94,6 @@ toc:
        - docs/getting-started-guides/ubuntu/glossary.md
        - docs/getting-started-guides/ubuntu/local.md
        - docs/getting-started-guides/ubuntu/logging.md
        - docs/getting-started-guides/ubuntu/manual.md
    - docs/getting-started-guides/windows/index.md
@@ -1,308 +0,0 @@
 ---
 approvers:
 - thockin
 title: Manually Deploying Kubernetes on Ubuntu Nodes
 ---
 {% capture overview %}
 This document describes how to deploy Kubernetes on ubuntu nodes, 1 master and 3 nodes involved
 in the given examples. You can scale to **any number of nodes** by changing some settings with ease.
 The original idea was heavily inspired by @jainvipin 's ubuntu single node
 work, which has been merge into this document.
 {% endcapture %}
 The scripting referenced here can be used to deploy Kubernetes with
 networking based either on Flannel or on a CNI plugin that you supply.
 This document is focused on the Flannel case.  See
 `kubernetes/cluster/ubuntu/config-default.sh` for remarks on how to
 use a CNI plugin instead.
 [Cloud team from Zhejiang University](https://github.com/ZJU-SEL) will maintain this work.
 {% capture prerequisites %}
 ## Prerequisites
 1. The nodes have installed docker version 1.2+ and bridge-utils to manipulate linux bridge.
 2. All machines can communicate with each other. Master node needs to be connected to the
 Internet to download the necessary files, while worker nodes do not.
 3. These guide is tested OK on Ubuntu 14.04 LTS 64bit server, but it can not work with
 Ubuntu 15 which uses systemd instead of upstart.
 4. Dependencies of this guide: etcd-2.2.1, flannel-0.5.5, k8s-1.2.0, may work with higher versions.
 5. All the remote servers can be ssh logged in without a password by using key authentication.
 6. The remote user on all machines is using /bin/bash as its login shell, and has sudo access.
 {% endcapture %}
 {% capture steps %}
 ## Starting a Cluster
 ### Set up working directory
 Clone the Kubernetes github repo locally
 ```shell
 $ git clone --depth 1 https://github.com/kubernetes/kubernetes.git
 ```
 #### Configure and start the Kubernetes cluster
 The startup process will first download all the required binaries automatically.
 By default etcd version is 2.2.1, flannel version is 0.5.5 and k8s version is 1.2.0.
 You can customize your etcd version, flannel version, k8s version by changing corresponding variables
 `ETCD_VERSION` , `FLANNEL_VERSION` and `KUBE_VERSION` like following.
 ```shell
 $ export KUBE_VERSION=1.2.0
 $ export FLANNEL_VERSION=0.5.0
 $ export ETCD_VERSION=2.2.0
 ```
 **Note**
 For users who want to bring up a cluster with k8s version v1.1.1, `controller manager` may fail to start
 due to [a known issue](https://github.com/kubernetes/kubernetes/issues/17109). You could raise it
 up manually by using following command on the remote master server. Note that
 you should do this only after `api-server` is up. Moreover, this issue is fixed in v1.1.2 and later.
 ```shell
 $ sudo service kube-controller-manager start
 ```
 Note that we use flannel here to set up overlay network, yet it's optional. Actually you can build up k8s
 cluster natively, or use flannel, Open vSwitch or any other SDN tool you like.
 An example cluster is listed below:
 ```shell
 | IP Address  |   Role   |
 |-------------|----------|
 |10.10.103.223|   node   |
 |10.10.103.162|   node   |
 |10.10.103.250| both master and node|
 ```
 First configure the cluster information in cluster/ubuntu/config-default.sh, following is a simple sample.
 ```shell
 export nodes="vcap@10.10.103.250 vcap@10.10.103.162 vcap@10.10.103.223"
 export roles="ai i i"
 export NUM_NODES=${NUM_NODES:-3}
 export SERVICE_CLUSTER_IP_RANGE=192.168.3.0/24
 export FLANNEL_NET=172.16.0.0/16
 ```
 The first variable `nodes` defines all your cluster nodes, master node comes first and
 separated with blank space like `<user_1@ip_1> <user_2@ip_2> <user_3@ip_3> `
 Then the `roles` variable defines the roles of above machine in the same order, "ai" stands for machine
 acts as both master and node, "a" stands for master, "i" stands for node.
 The `NUM_NODES` variable defines the total number of nodes.
 The `SERVICE_CLUSTER_IP_RANGE` variable defines the Kubernetes service IP range. Please make sure
 that you do have a valid private ip range defined here, because some IaaS provider may reserve private ips.
 You can use below three private network range according to rfc1918. Besides you'd better not choose the one
 that conflicts with your own private network range.
 ```shell
 10.0.0.0        -   10.255.255.255  (10/8 prefix)
 172.16.0.0      -   172.31.255.255  (172.16/12 prefix)
 192.168.0.0     -   192.168.255.255 (192.168/16 prefix)
 ```
 The `FLANNEL_NET` variable defines the IP range used for flannel overlay network,
 should not conflict with above `SERVICE_CLUSTER_IP_RANGE`.
 You can optionally provide additional Flannel network configuration
 through `FLANNEL_BACKEND` and `FLANNEL_OTHER_NET_CONFIG`, as explained in `cluster/ubuntu/config-default.sh`.
 The default setting for `ADMISSION_CONTROL` is right for the latest
 release of Kubernetes, but if you choose an earlier release then you
 might want a different setting.  See
 [the admission control doc](/docs/admin/admission-controllers/#is-there-a-recommended-set-of-plug-ins-to-use)
 for the recommended settings for various releases.
 **Note:** When deploying, master needs to be connected to the Internet to download the necessary files.
 If your machines are located in a private network that need proxy setting to connect the Internet,
 you can set the config `PROXY_SETTING` in cluster/ubuntu/config-default.sh such as:
    PROXY_SETTING="http_proxy=http://server:port https_proxy=https://server:port"
 After all the above variables being set correctly, we can use following command in `cluster/` directory to
 bring up the whole cluster.
 ```shell
 $ KUBERNETES_PROVIDER=ubuntu ./kube-up.sh
 ```
 The scripts automatically copy binaries and config files to all the machines via `scp` and start Kubernetes
 service on them. The only thing you need to do is to type the sudo password when promoted.
 ```shell
 Deploying node on machine 10.10.103.223
 ...
 [sudo] password to start node: 
 ```
 If everything works correctly, you will see the following message from console indicating the k8s cluster is up.
 ```shell
 Cluster validation succeeded
 ```
 ### Test it out
 You can use `kubectl` command to check if the newly created cluster is working correctly.
 The `kubectl` binary is under the `cluster/ubuntu/binaries` directory.
 You can make it available via PATH, then you can use the below command smoothly.
 For example, use `$ kubectl get nodes` to see if all of your nodes are ready.
 ```shell
 $ kubectl get nodes
 NAME            STATUS   AGE   VERSION
 10.10.103.162   Ready    3d    v1.6.0+fff5156
 10.10.103.223   Ready    3d    v1.6.0+fff5156
 10.10.103.250   Ready    3d    v1.6.0+fff5156
 ```
 Also you can run Kubernetes [guest-example](https://github.com/kubernetes/examples/tree/{{page.githubbranch}}/guestbook/) to build a redis backend cluster．
 ### Deploy addons
 Assuming you have a starting cluster now, this section will tell you how to deploy addons like DNS
 and UI onto the existing cluster.
 The configuration of DNS is configured in cluster/ubuntu/config-default.sh.
 ```shell
 ENABLE_CLUSTER_DNS="${KUBE_ENABLE_CLUSTER_DNS:-true}"
 DNS_SERVER_IP="192.168.3.10"
 DNS_DOMAIN="cluster.local"
 DNS_REPLICAS=1
 ```
 The `DNS_SERVER_IP` is defining the ip of dns server which must be in the `SERVICE_CLUSTER_IP_RANGE`.
 The `DNS_REPLICAS` describes how many dns pod running in the cluster.
 By default, we also take care of kube-ui addon.
 ```shell
 ENABLE_CLUSTER_UI="${KUBE_ENABLE_CLUSTER_UI:-true}"
 ```
 After all the above variables have been set, just type the following command.
 ```shell
 $ cd cluster/ubuntu
 $ KUBERNETES_PROVIDER=ubuntu ./deployAddons.sh
 ```
 After some time, you can use `$ kubectl get pods --namespace=kube-system` to see the DNS and UI pods are running in the cluster.
 ### On going
 We are working on these features which we'd like to let everybody know:
 1. Run Kubernetes binaries in Docker using [kube-in-docker](https://github.com/ZJU-SEL/kube-in-docker/tree/baremetal-kube),
 to eliminate OS-distro differences.
 2. Tearing Down scripts: clear and re-create the whole stack by one click.
 ### Troubleshooting
 Generally, what this approach does is quite simple:
 1. Download and copy binaries and configuration files to proper directories on every node.
 2. Configure `etcd` for master node using IPs based on input from user.
 3. Create and start flannel network for worker nodes.
 So if you encounter a problem, check etcd configuration of master node first.
 1. Check `/var/log/upstart/etcd.log` for suspicious etcd log
 2. You may find following commands useful, the former one to bring down the cluster, while the latter one could start it again.
 ```shell
 $ KUBERNETES_PROVIDER=ubuntu ./kube-down.sh
 $ KUBERNETES_PROVIDER=ubuntu ./kube-up.sh
 ```
 3. You can also customize your own settings in `/etc/default/{component_name}` and restart it via
 `$ sudo service {component_name} restart`.
 ## Upgrading a Cluster
 If you already have a Kubernetes cluster, and want to upgrade to a new version,
 you can use following command in `cluster/` directory to update the whole cluster
 or a specified node to a new version.
 ```shell
 $ KUBERNETES_PROVIDER=ubuntu ./kube-push.sh [-m|-n <node id>] <version>
 ```
 It can be done for all components (by default), master(`-m`) or specified node(`-n`).
 Upgrading a single node is currently experimental.
 If the version is not specified, the script will try to use local binaries. You should ensure all
 the binaries are well prepared in the expected directory path cluster/ubuntu/binaries.
 ```shell
 $ tree cluster/ubuntu/binaries
 binaries/
 ├── kubectl
 ├── master
 │   ├── etcd
 │   ├── etcdctl
 │   ├── flanneld
 │   ├── kube-apiserver
 │   ├── kube-controller-manager
 │   └── kube-scheduler
 └── minion
    ├── flanneld
    ├── kubelet
    └── kube-proxy
 ```
 You can use following command to get a help.
 ```shell
 $ KUBERNETES_PROVIDER=ubuntu ./kube-push.sh -h
 ```
 Here are some examples:
 * upgrade master to version 1.0.5: `$ KUBERNETES_PROVIDER=ubuntu ./kube-push.sh -m 1.0.5`
 * upgrade node `vcap@10.10.103.223` to version 1.0.5 : `$ KUBERNETES_PROVIDER=ubuntu ./kube-push.sh -n 10.10.103.223 1.0.5`
 * upgrade master and all nodes to version 1.0.5: `$ KUBERNETES_PROVIDER=ubuntu ./kube-push.sh 1.0.5`
 The script will not delete any resources of your cluster, it just replaces the binaries.
 ### Test it out
 You can use the `kubectl` command to check if the newly upgraded Kubernetes cluster is working correctly.
 To make sure the version of the upgraded cluster is what you expect, you will find these commands helpful.
 * upgrade all components or master: `$ kubectl version`. Check the *Server Version*.
 * upgrade node `vcap@10.10.102.223`: `$ ssh -t vcap@10.10.102.223 'cd /opt/bin && sudo ./kubelet --version'`*
 {% endcapture %}
 ## Support Level
 IaaS Provider        | Config. Mgmt | OS     | Networking  | Docs                                              | Conforms | Support Level
 -------------------- | ------------ | ------ | ----------  | ---------------------------------------------     | ---------| ----------------------------
 Bare-metal           | custom       | Ubuntu | flannel     | [docs](/docs/getting-started-guides/ubuntu)                                 |          | Community ([@resouer](https://github.com/resouer), [@WIZARD-CXY](https://github.com/WIZARD-CXY))
 For support level information on all solutions, see the [Table of solutions](/docs/getting-started-guides/#table-of-solutions) chart.
 {% include templates/task.md %}
@@ -120,7 +120,6 @@ These solutions are combinations of cloud providers and operating systems not co
 * [Fedora (Multi Node)](/docs/getting-started-guides/fedora/flannel_multi_node_cluster)
 * [CentOS](/docs/getting-started-guides/centos/centos_manual_config)
 * [Kubernetes on Ubuntu](/docs/getting-started-guides/ubuntu/)
 * [Manually Deploying Kubernetes on Ubuntu Nodes](/docs/getting-started-guides/ubuntu/manual)
 * [CoreOS on AWS or GCE](/docs/getting-started-guides/coreos)
 ## Integrations