Merge pull request #29562 from mengjiao-liu/sync-1.22-windows-runtime

[zh] Setup files to sync for 1.22(windows & runtime)

content/zh/docs/setup/production-environment/container-runtimes.md

@@ -106,6 +106,64 @@ configuration, or reinstall it using automation.
 如果你有切实可行的自动化方案，使用其他已更新配置的节点来替换该节点，
 或者使用自动化方案来重新安装。
 
+<!--
+## Cgroup v2
+
+Cgroup v2 is the next version of the cgroup Linux API.  Differently than cgroup v1, there is a single
+hierarchy instead of a different one for each controller.
+-->
+## Cgroup v2
+Cgroup v2 是 cgroup Linux API 的下一个版本。与 cgroup v1 不同的是，
+Cgroup v2 只有一个层次结构，而不是每个控制器有一个不同的层次结构。
+
+<!--
+The new version offers several improvements over cgroup v1, some of these improvements are:
+
+- cleaner and easier to use API
+- safe sub-tree delegation to containers
+- newer features like Pressure Stall Information
+-->
+新版本对 cgroup v1 进行了多项改进，其中一些改进是：
+
+- 更简洁、更易于使用的 API
+- 可将安全子树委派给容器
+- 更新的功能，如压力失速信息（Pressure Stall Information）
+
+<!--
+Even if the kernel supports a hybrid configuration where some controllers are managed by cgroup v1
+and some others by cgroup v2, Kubernetes supports only the same cgroup version to manage all the
+controllers.
+
+If systemd doesn't use cgroup v2 by default, you can configure the system to use it by adding
+`systemd.unified_cgroup_hierarchy=1` to the kernel command line.
+-->
+尽管内核支持混合配置，即其中一些控制器由 cgroup v1 管理，另一些由 cgroup v2 管理，
+Kubernetes 仅支持使用同一 cgroup 版本来管理所有控制器。
+
+如果 systemd 默认不使用 cgroup v2，你可以通过在内核命令行中添加 
+`systemd.unified_cgroup_hierarchy=1` 来配置系统去使用它。
+
+```shell
+# dnf install -y grubby && \
+  sudo grubby \
+  --update-kernel=ALL \
+  --args=”systemd.unified_cgroup_hierarchy=1"
+```
+
+<!--
+To apply the configuration, it is necessary to reboot the node.
+
+There should not be any noticeable difference in the user experience when switching to cgroup v2, unless
+users are accessing the cgroup file system directly, either on the node or from within the containers.
+
+In order to use it, cgroup v2 must be supported by the CRI runtime as well.
+-->
+要应用配置，必须重新启动节点。
+
+切换到 cgroup v2 时，用户体验不应有任何明显差异，
+除非用户直接在节点上或在容器内访问 cgroup 文件系统。
+为了使用它，CRI 运行时也必须支持 cgroup v2。
+
 <!-- 
 ### Migrating to the `systemd` driver in kubeadm managed clusters
 -->

content/zh/docs/setup/production-environment/windows/intro-windows-in-kubernetes.md

@@ -124,9 +124,9 @@ Windows 容器仅能调度到 Windows 节点，Linux 容器则只能调度到 Li
 
 | Kubernetes 版本 | Windows Server LTSC 版本 | Windows Server SAC 版本 |
 | --- | --- | --- | --- |
-| *Kubernetes v1.19* | Windows Server 2019 | Windows Server ver 1909, Windows Server ver 2004 |
 | *Kubernetes v1.20* | Windows Server 2019 | Windows Server ver 1909, Windows Server ver 2004 |
 | *Kubernetes v1.21* | Windows Server 2019 | Windows Server ver 2004, Windows Server ver 20H2 |
+| *Kubernetes v1.22* | Windows Server 2019 | Windows Server ver 2004, Windows Server ver 20H2 |
 
 <!--
 Information on the different Windows Server servicing channels including their
@@ -184,13 +184,25 @@ limitation and compatibility rules will change.
 <!--
 #### Pause Image
 
-Microsoft maintains a Windows pause infrastructure container at
+Kubernetes maintains a multi-architecture image that includes support for Windows.
-`mcr.microsoft.com/oss/kubernetes/pause:3.4.1`.
+For Kubernetes v1.22 the recommended pause image is `k8s.gcr.io/pause:3.5`.
+The [source code](https://github.com/kubernetes/kubernetes/tree/master/build/pause)
+is available on GitHub.
+
+Microsoft maintains a multi-architecture image with Linux and Windows amd64 support at `mcr.microsoft.com/oss/kubernetes/pause:3.5`.
+This image is built from the same source as the Kubernetes maintained image but all of the Windows binaries are [authenticode signed](https://docs.microsoft.com/en-us/windows-hardware/drivers/install/authenticode) by Microsoft.
+The Microsoft maintained image is recommended for production environments when signed binaries are required.
 -->
 #### Pause 镜像   {#pause-image}
 
-Microsoft 在 `mcr.microsoft.com/oss/kubernetes/pause:3.4.1` 处维护
+Kubernetes 维护着一个多体系结构镜像，其中包括对 Windows 的支持。
-一个 pause 基础设施容器镜像。
+对于 Kubernetes v1.22，推荐的 pause 镜像是 `k8s.gcr.io/pause:3.5`。
+[源代码](https://github.com/kubernetes/kubernetes/tree/master/build/pause)可在 GitHub 上找到。
+
+Microsoft 维护了一个支持 Linux 和 Windows amd64 的多体系结构镜像： `mcr.microsoft.com/oss/kubernetes/pause:3.5`。
+此镜像与 Kubernetes 维护的镜像是从同一来源构建，但所有 Windows 二进制文件
+均由 Microsoft [签名](https://docs.microsoft.com/en-us/windows-hardware/drivers/install/authenticode)。
+当生产环境需要被签名的二进制文件时，建议使用 Microsoft 维护的镜像。
 
 <!--
 #### Compute
@@ -418,7 +430,7 @@ FlexVolume 插件处理将卷挂接到 Kubernetes 节点或从其上解挂、将
 -->
 ##### CSI 插件   {#csi-plugins}
 
-{{< feature-state for_k8s_version="v1.19" state="beta" >}}
+{{< feature-state for_k8s_version="v1.22" state="stable" >}}
 
 <!--
 Code associated with {{< glossary_tooltip text="CSI" term_id="csi" >}} plugins
@@ -428,9 +440,7 @@ DaemonSets and StatefulSets. CSI plugins handle a wide range of volume
 management actions in Kubernetes: provisioning/de-provisioning/resizing of
 volumes, attaching/detaching of volumes to/from a Kubernetes node and
 mounting/dismounting a volume to/from individual containers in a pod,
-backup/restore of persistent data using snapshots and cloning. CSI plugins
+backup/restore of persistent data using snapshots and cloning.
-typically consist of node plugins (that run on each node as a DaemonSet) and
-controller plugins.
 -->
 与 {{< glossary_tooltip text="CSI" term_id="csi" >}} 插件相关联的代码作为
 树外脚本和可执行文件来发布且通常发布为容器镜像形式，并使用 DaemonSet 和
@@ -438,30 +448,26 @@ StatefulSet 这类标准的 Kubernetes 构造体来部署。
 CSI 插件处理 Kubernetes 中的很多卷管理操作：对卷的配备、去配和调整大小，
 将卷挂接到 Kubernetes 节点或从节点上解除挂接，将卷挂载到需要持久数据的 Pod
 中的某容器或从容器上卸载，使用快照和克隆来备份或恢复持久数据。
-CSI 插件通常包含节点插件（以 DaemonSet 形式运行于各节点上）和控制器插件。
 
 <!--
-CSI node plugins (especially those associated with persistent volumes exposed
+CSI plugins communicate with a CSI node plugin which performs the local storage operations.
-as either block devices or over a shared file-system) need to perform various
+On Windows nodes CSI node plugins typically call APIs exposed by the community-managed
-privileged operations like scanning of disk devices, mounting of file systems,
+[csi-proxy](https://github.com/kubernetes-csi/csi-proxy) which handles the local storage operations.
-etc. These operations differ for each host operating system. For Linux worker
+
-nodes, containerized CSI node plugins are typically deployed as privileged
+Please refer to the deployment guide of the environment where you wish to deploy a Windows CSI plugin
-containers. For Windows worker nodes, privileged operations for containerized
+for further details around installation.
-CSI node plugins is supported using
+You may also refer to the following [installation steps](https://github.com/kubernetes-csi/csi-proxy#installation).
-[csi-proxy](https://github.com/kubernetes-csi/csi-proxy), a community-managed,
-stand-alone binary that needs to be pre-installed on each Windows node. Please
-refer to the deployment guide of the CSI plugin you wish to deploy for further
-details.
 -->
-CSI 节点插件（尤其是那些通过块设备或者共享文件系统形式来提供持久卷的插件）
-需要执行很多特权级操作，例如扫描磁盘设备、挂载文件系统等等。
-这些操作在不同的宿主操作系统上差别较大。对于 Linux 工作节点而言，容器化的
-CSI 节点插件通常部署为特权级的容器。对于 Windows 工作节点而言，容器化的
-CSI 节点插件的特权操作通过
-[csi-proxy](https://github.com/kubernetes-csi/csi-proxy)
 来支持；csi-proxy 是一个社区管理的、独立的可执行文件，需要预安装在每个
 Windows 节点之上。请参考你要部署的 CSI 插件的部署指南以进一步了解其细节。
 
+CSI 插件与执行本地存储操作的 CSI 节点插件通信。
+在 Windows 节点上，CSI 节点插件通常调用处理本地存储操作的 [csi-proxy](https://github.com/kubernetes-csi/csi-proxy) 
+公开的 API, csi-proxy 由社区管理。
+
+有关安装的更多详细信息，请参阅你要部署的 Windows CSI 插件的环境部署指南。
+你也可以参考以下[安装步骤](https://github.com/kubernetes-csi/csi-proxy#installation) 。
+
 <!--
 #### Networking
 
@@ -1875,10 +1881,8 @@ Kubernetes 中日志是故障排查的一个重要元素。确保你在尝试从
     注册 kubelet.exe：
 
     ```powershell
-    # Microsoft 在 mcr.microsoft.com/oss/kubernetes/pause:3.4.1
-    # 发布其基础设施容器镜像
     nssm install kubelet C:\k\kubelet.exe
-    nssm set kubelet AppParameters --hostname-override=<hostname> --v=6 --pod-infra-container-image=mcr.microsoft.com/oss/kubernetes/pause:3.4.1 --resolv-conf="" --allow-privileged=true --enable-debugging-handlers --cluster-dns=<DNS-service-IP> --cluster-domain=cluster.local --kubeconfig=c:\k\config --hairpin-mode=promiscuous-bridge --image-pull-progress-deadline=20m --cgroups-per-qos=false  --log-dir=<log directory> --logtostderr=false --enforce-node-allocatable="" --network-plugin=cni --cni-bin-dir=c:\k\cni --cni-conf-dir=c:\k\cni\config
+    nssm set kubelet AppParameters --hostname-override=<hostname> --v=6 --pod-infra-container-image=k8s.gcr.io/pause:3.5 --resolv-conf="" --allow-privileged=true --enable-debugging-handlers --cluster-dns=<DNS-service-IP> --cluster-domain=cluster.local --kubeconfig=c:\k\config --hairpin-mode=promiscuous-bridge --image-pull-progress-deadline=20m --cgroups-per-qos=false  --log-dir=<log directory> --logtostderr=false --enforce-node-allocatable="" --network-plugin=cni --cni-bin-dir=c:\k\cni --cni-conf-dir=c:\k\cni\config
     nssm set kubelet AppDirectory C:\k
     nssm start kubelet
     ```
@@ -2177,11 +2181,11 @@ Kubernetes 中日志是故障排查的一个重要元素。确保你在尝试从
 <!--
 * `kubectl port-forward` fails with "unable to do port forwarding: wincat not found"
 
-  This was implemented in Kubernetes 1.15 by including wincat.exe in the pause
+  Port forwarding support for Windows requires wincat.exe to be available in the
-  infrastructure container `mcr.microsoft.com/oss/kubernetes/pause:3.4.1`. Be
+  [pause infrastructure container](#pause-image).
-  sure to use these versions or newer ones. If you would like to build your
+  Ensure you are using a supported image that is compatable with your Windows OS version.
-  own pause infrastructure container, be sure to include
+  If you would like to build your own pause infrastructure container be sure to include
-  [wincat](https://github.com/kubernetes-sigs/sig-windows-tools/tree/master/cmd/wincat).
+  [wincat](https://github.com/kubernetes/kubernetes/tree/master/build/pause/windows/wincat).
 -->
 * `kubectl port-forward` 失败，错误信息为 "unable to do port forwarding: wincat not found"
 
@@ -2190,6 +2194,10 @@ Kubernetes 中日志是故障排查的一个重要元素。确保你在尝试从
   请确保你使用的是这些版本或者更新版本。
   如果你想要自行构造你自己的 pause 基础设施容器，要确保其中包含了
   [wincat](https://github.com/kubernetes-sigs/sig-windows-tools/tree/master/cmd/wincat)
+  
+  Windows 的端口转发支持需要在 [pause 基础设施容器](#pause-image) 中提供 wincat.exe。
+  确保你使用的是与你的 Windows 操作系统版本兼容的受支持镜像。
+  如果你想构建自己的 pause 基础架构容器，请确保包含 [wincat](https://github.com/kubernetes/kubernetes/tree/master/build/pause/windows/wincat).。
 
 <!--
 * My Kubernetes installation is failing because my Windows Server node is
@@ -2216,10 +2224,8 @@ Kubernetes 中日志是故障排查的一个重要元素。确保你在尝试从
   to accommodate worker containers crashing or restarting without losing any of
   the networking configuration.
 
-  The "pause" (infrastructure) image is hosted on Microsoft Container Registry
+  Refer to the [pause image](#pause-image) section to find the recommended version
-  (MCR). You can access it using `mcr.microsoft.com/oss/kubernetes/pause:3.4.1`.
+  of the pause image.
-  For more details, see the
-  [DOCKERFILE](https://github.com/kubernetes-sigs/sig-windows-tools/tree/master/cmd/wincat).
 -->
 * `pause` 容器是什么？
 
@@ -2228,10 +2234,7 @@ Kubernetes 中日志是故障排查的一个重要元素。确保你在尝试从
   网络名字空间和端点（相同的 IP 和端口空间）。我们需要 pause 容器来工作容器崩溃或
   重启的状况，以确保不会丢失任何网络配置。
 
-  "pause" （基础设施）镜像托管在 Microsoft Container Registry (MCR) 上。
+  请参阅 [pause 镜像](#pause-image) 部分以查找 pause 镜像的推荐版本。
-  你可以使用 `mcr.microsoft.com/oss/kubernetes/pause:3.4.1` 来访问它。
-  要了解进一步的细节，可参阅
-  [DOCKERFILE](https://github.com/kubernetes-sigs/sig-windows-tools/tree/master/cmd/wincat)。
 
 <!--
 ### Further investigation

content/zh/docs/setup/production-environment/windows/user-guide-windows-containers.md

@@ -40,7 +40,7 @@ Windows 应用程序构成了许多组织中运行的服务和应用程序的很
 ## Before you begin
 
 * Create a Kubernetes cluster that includes a
-[master and a worker node running Windows Server](../user-guide-windows-nodes)
+control plane and a [worker node running Windows Server](/docs/tasks/administer-cluster/kubeadm/adding-windows-nodes/)
 * It is important to note that creating and deploying services and workloads on Kubernetes
 behaves in much the same way for Linux and Windows containers.
 [Kubectl commands](/docs/reference/kubectl/overview/) to interface with the cluster are identical.
@@ -48,8 +48,8 @@ The example in the section below is provided to jumpstart your experience with W
 -->
 ## 在你开始之前
 
-* 创建一个 Kubernetes 集群，其中包括一个
+* 创建一个 Kubernetes 集群，其中包括一个控制平面和
-  [运行 Windows 服务器的主节点和工作节点](/zh/docs/tasks/administer-cluster/kubeadm/adding-windows-nodes/)
+  [运行 Windows 服务器的工作节点](/zh/docs/tasks/administer-cluster/kubeadm/adding-windows-nodes/)
 * 重要的是要注意，对于 Linux 和 Windows 容器，在 Kubernetes 
   上创建和部署服务和工作负载的行为几乎相同。
   与集群接口的 [kubectl 命令](/zh/docs/reference/kubectl/overview/)相同。
@@ -139,15 +139,15 @@ the container port 80 is exposed directly to the service.
 1. Check that the deployment succeeded. To verify:
 
     * Two containers per pod on the Windows node, use `docker ps` 
-    * Two pods listed from the Linux master, use `kubectl get pods` 
+    * Two pods listed from the Linux control plane node, use `kubectl get pods` 
-    * Node-to-pod communication across the network, `curl` port 80 of your pod IPs from the Linux master
+    * Node-to-pod communication across the network, `curl` port 80 of your pod IPs from the Linux control plane node 
       to check for a web server response
     * Pod-to-pod communication, ping between pods (and across hosts, if you have more than one Windows node)
       using docker exec or kubectl exec
     * Service-to-pod communication, `curl` the virtual service IP (seen under `kubectl get services`)
-      from the Linux master and from individual pods
+      from the Linux control plane node and from individual pods
     * Service discovery, `curl` the service name with the Kubernetes [default DNS suffix](/docs/concepts/services-networking/dns-pod-service/#services)
-    * Inbound connectivity, `curl` the NodePort from the Linux master or machines outside of the cluster
+    * Inbound connectivity, `curl` the NodePort from the Linux control plane node or machines outside of the cluster
     * Outbound connectivity, `curl` external IPs from inside the pod using kubectl exec
 -->
 1. 检查所有节点是否健康：
@@ -168,15 +168,15 @@ the container port 80 is exposed directly to the service.
 1. 检查部署是否成功。验证：
 
    * Windows 节点上每个 Pod 有两个容器，使用  `docker ps` 
-   * Linux 主机列出两个 Pod，使用  `kubectl get pods` 
+   * Linux 控制平面节点列出两个 Pod，使用  `kubectl get pods` 
-   * 跨网络的节点到 Pod 通信，从 Linux 主服务器 `curl` 您的 pod IPs 的端口80，以检查 Web 服务器响应
+   * 跨网络的节点到 Pod 通信，从 Linux 控制平面节点 `curl` 您的 pod IPs 的端口80，以检查 Web 服务器响应
    * Pod 到 Pod 的通信，使用 docker exec 或 kubectl exec 在 Pod 之间
      （以及跨主机，如果你有多个 Windows 节点）进行 ping 操作
-   * 服务到 Pod 的通信，从 Linux 主服务器和各个 Pod 中 `curl` 虚拟服务 IP
+   * 服务到 Pod 的通信，从 Linux 控制平面节点和各个 Pod 中 `curl` 虚拟服务 IP
      （在 `kubectl get services` 下可见）
    * 服务发现，使用 Kubernetes `curl` 服务名称
      [默认 DNS 后缀](/zh/docs/concepts/services-networking/dns-pod-service/#services)
-   * 入站连接，从 Linux 主服务器或集群外部的计算机 `curl` NodePort
+   * 入站连接，从 Linux 控制平面节点或集群外部的计算机 `curl` NodePort
    * 出站连接，使用 kubectl exec 从 Pod 内部 curl 外部 IP
 
 <!--
@@ -324,11 +324,10 @@ For example:  `--register-with-taints='os=windows:NoSchedule'`
 <!--
 By adding a taint to all Windows nodes, nothing will be scheduled on them (that includes existing Linux Pods).
 In order for a Windows Pod to be scheduled on a Windows node,
-it would need both the nodeSelector to choose Windows, and the appropriate matching toleration.
+it would need both the nodeSelector and the appropriate matching toleration to choose Windows.
 -->
 向所有 Windows 节点添加污点后，Kubernetes 将不会在它们上调度任何负载（包括现有的 Linux Pod）。
-为了使某 Windows Pod 调度到 Windows 节点上，该 Pod 既需要 nodeSelector 选择 Windows，
+为了使某 Windows Pod 调度到 Windows 节点上，该 Pod 需要 nodeSelector 和合适的匹配的容忍度设置来选择 Windows，
-也需要合适的匹配的容忍度设置。
 
 ```yaml
 nodeSelector: